Many parts for PACE products can be obtained by providing a brief description of the part (for instance - wheel for the return fan, or upper heating coil) and the 9-digit serial number.  The serial number is often located on the fan itself or in the case of the custom units on or near the fan access.  It can be found on an aluminum or foil ID nameplate in the following nine digit numeric format (xx-xxxxx-xx).  

If you have the model number, (also found on the ID nameplate) providing that as well may help us cut down the research time necessary to locate your part.

Many replacement parts are available for the following PACE products:

DD, CRE, CTR, ER, PM, Pressure Blowers, SCF (see below), SCR, TA, Utility sets, VR, VRE

Components for PACE unitary products are also available such as:

Bearings, belts, dampers, drive sheaves, Evap-pak media, Econo-cone, Econo-disk (see below), filters, inlet cones, motors, shafts, spring isolators (see below) and wheels.

Small Cabinet Fans
SCF 52A & 52B                   SCF 165A
SCF 57A & 57B                   SCF 180A
SCF 63A & 63B                   SCF 200A
SCF 73A & 73B                   SCF 224A
SCF 79A & 79B                   SCF 250A
SCF 85A & 85B                   SCF 280A
SCF 97A & 97B                   SCF 315A
SCF 114A & 114B                SCF 355A
SCF 124A                             SCF 400A
SCF 135A                             SCF 450A
SCF 150A

We have some of the hard to find blower wheels for SCF models such as:

Size 52  – 5.25” diameter x 6.875” wide x .625” bore – SPECIAL ORDER
Size 57 – 5.68” diameter x 6.875” wide x .625” bore – IN STOCK
Size 63 – 6.25” diameter x 6.875” wide x .625” bore - IN STOCK
Size 73 – 7.25” diameter x 7.00” wide x .75” bore – IN STOCK
Size 79 – 7.8125” diameter x 7.5625” wide x .75” bore – IN STOCK
Size 85 – 8.4375” diameter x 8.8125” wide x .75” bore – IN STOCK

Size 97 – (Wheel style changed around 1990)
“Old Style” Size 97– 9.75” diameter x 9.375” wide x 1.00” bore – SPECIAL ORDER
“New Style” Size 97- 8.00” diameter x 10.6825” wide x 1.00” bore – IN STOCK

Size 114 – (Wheel style changed around 1990)
“Old Style” Size 114– 11.375” diameter x 12.375” wide x 1.00” bore – SPECIAL ORDER
“New Style” Size 114- 13.125” diameter x 9.5” wide x 1.00” bore – SPECIAL ORDER

Most SPECIAL ORDER wheels can be ordered for quick ship in a few days!  Email for Price and Availability.

Spring Isolators
Research time can be greatly reduced by providing the outside diameter of the spring and the spring’s color.

Parts for Pace Super quiet DD fans:

Barrel springs - 1.16” tall x .5” od - for Ό” studs
Barrel springs - 1.25” tall x .625” od - for 5/16” studs
Barrel springs - 1.625” tall x .72” od - for 3/8” studs

Replacement “long shaft” DD motors for the following:

1/10 HP, 1050 RPM, 60 HZ, 115V
- Magnetek Part: HE3E231N
- Century Part: 7-135703-03

1/50 HP, 1050 RPM, 60 HZ, 115V
- A.O. Smith  #322P186

Replacement DD wheels:

Size 52 DD – 250 – 5.25” diameter x 6.875” wide x .5” bore – SPECIAL ORDER
Size 57 DD - 350 – 5.68” diameter x 6.875” wide x .5” bore – IN STOCK
Size 63 DD - 450– 6.25” diameter x 6.875” wide x .5” bore – IN STOCK
Size 73 DD - 650– 7.25” diameter x 7.00” wide x .5” bore – IN STOCK
Size 79 DD - 850– 7.8125” diameter x 7.5625” wide x .5” bore – IN STOCK

We also have a few "New Old Stock" PACE Super Quiet DD fans:

Size 200-T
Size 650-TF
Size 850-G

PACE Econo-disk

Email for E-disk part pricing and availability!

Tokico gas springs
Y2507
Y2511
Y3014
Y3015
Y3019
Y3029